[Recovery[[Root][32/64-bit] TWRP 3.2.1-0 For LG K20 Plus (TP260 & MP260)

[Recovery[[Root][32/64-bit] TWRP 3.2.1-0 For LG K20 Plus (TP260 & MP260)



*** Disclamer
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.

WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
 Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.

Supported Models :
TP260 & MP260

Prerequisites :

How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:

How to flash Twrp:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal

Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]

WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and POWER IT OFF BY PULLING OUT THE BATTERY and putting it back in.

HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!

Use the hard keys to select "YES" and then "YES" again to boot into TWRP

How to Disable encryption and flash super su [Install Root]:

Downloads :
[Please do not mirror the downloads]

Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.

Credits: Myself, Messi2050, and Teamwin

If you would like to donate to someone for this project, feel free to donate to Messi2050. Without their work (including but not limited to thread template, and device tree specifically for twrp) this project may not have happened from me. So until I can contribute more than a TWRP build or modified stock kernel, please send your thanks that way.

A note from Messi2050
Please note I don't own this device, spend a lot of my time bringing these builds for you to use and benefit from. so make sure to hit the thanks button and Consider to donate if you appreciate my work ;)
Paypal donation link: https://paypal.me/messi2050

EDIT: So i messed up and apparently uploaded the 32bit TWRP by mistake and haven't built a bootable 64bit twrp in a while. I've been debugging building a 64bit TWRP based on an Oreo kernel.
I have uploaded RedWolf recovery which supports both 32bit and 64bit I'm sure of it this time. Sorry for the inconvenience and being a real d!^k to anyone who brought up having error 255 when flashing 64 bit builds in TWRP. This redwolf recovery will resolve such issues.
Chi Tiết

Đăng nhận xét

Copyright © 2016. AZSOFT unlock sữa chữa mua bán cài đặt - All Rights Reserved